Central vacuum cleaner
Central vacuum cleaner
Central vacuum cleaner
Central vacuum cleaner
Central vacuum cleaner
Central vacuum cleaner
Accessories carpet's broom
Accessories hoses
Basic accessories
Central vacuum cleaner
Central vacuum cleaner
Central vacuum cleaner
Central vacuum cleaner
Central vacuum cleaner
Model 500
Model 500s
Model 1500
Model 1500s
Model 1500sc
Model 2000
Model 2000sc
Model 3000
Model 3000sc
Model 4000
Model 4000sc
Home
|
Français
Domestic Models
·
Model 500
·
Model 500s
·
Model 1500
·
Model 1500s
·
Model 1500sc
·
Model 2000
·
Model 2000sc
·
Model 3000
·
Model 3000sc
Industrial Models
·
Model 4000
·
Model 4000sc
Air Driven Brushs
Accessories Kits
Floor Tools
Small Tools
Tools Kits
Telescopic Wands
The Caddys
Hoses
Vacsocs
Installation Hardwares
The Motors
Catalog
(533K)
A comprehensive "How-To" Guide to assist you in the planning and installation of your Built-In Vacuum System
·
Planning
·
Existing Construction
·
New Construction
Rough-in
·
SuperValve
·
Mounting Plate
Frequently Asked Questions
Printer Friendly
Owner manuel
(1686K)
FAQ-0001 -
The vacuum doesn't work
FAQ-0002 -
A loss of suction
FAQ-0003 -
The vacuum breaker keeps tripping or is tripping after 15 minutes of operation
You did not find the answer to your question, do not hesitate to contact us and we will answer your question as soon as possible.
FAQ-0001 -
The vacuum doesn't work
Check the contact pins in the wall plugs.
Is your hose switch defective.
Check to ensure your vacuum is properly plugged in.
Try pressing the reset button on the vacuum.
Check your electrical box for a tripped breaker.
If your << Square-D >> electrical box, you should buy a << High Magnetic >> breaker.
[ - Imprimer seulement la FAQ-0001 - ]
Page Up
FAQ-0002 -
A loss of suction
Each joint in your wall tubing (PVC) and plugs for leaks.
Ensure that the vacuum's dustbin is properly seated and that its seal is not broken or misaligned.
Clean the filter.
[ - Imprimer seulement la FAQ-0002 - ]
Page Up
FAQ-0003 -
The vacuum breaker keeps tripping or is tripping after 15 minutes of operation
The vacuum should be installed on a single dedicated breaker ( see technical specifications ).
The dedicated breaker is tripping but only after 10 minutes or so. Replace the breaker with a high magnetic breaker.
[ - Imprimer seulement la FAQ-0003 - ]
Page Up
Copyright © 2001-2005 Soliroc Metal
-
1.877.423.4986
Contact us
-
Credits
-
Privacy policy